Michael Stevens Consulting Limited – Our client in various sectors is recruiting suitably qualified candidates to fill the following positions below:
1.) MCI Engineer
Job Title: MCI Engineer
Location: Lagos
Employment Type: Full-time
Service Type: Materials and Corrosion (MCI) Engineering services to be deployed by a Nigerian National.
Service Description
- Ensure the implementation of Materials, Corrosion, and Integrity (MCI) requirements in the design, fabrication, testing, installation, pre-commissioning, and commissioning of the BN project. Ensure the final products delivered meets the MCI requirements as well as the project scope of work and specifications.
- Carry out the MCI activities during detail design, fabrication, testing, installation, and support the commissioning in accordance with Company policies and standards.
- Address MCI related technical queries and clarification questions from vendors.
- Set up and manage appropriate systems required to assure integrity of the project scope.
- Provide technical assurance and ensure that all MCI deliverables as defined in the Project Controls and Assurance Plan (PCAP) are completed successfully to meet Project specifications and quality standards.
- Carry out the identification, maturation and deployment of value adding new MCI related technologies and innovations to optimize the project scope. Support the testing and qualification of these new technologies.
- Monitor the testing of materials.
- Contribute to the development of fit for purpose quality plan and Inspection and Test Plan (ITP) including materials management procedure for the Project.
- Ensure the identification and lateral application of MCI related learnings from other projects.
- Contribute to the management of change process to ensure technical integrity, efficiency, and safety of facilities.
- Liaise with the broader materials and corrosion organization within Shell both locally and globally to ensure up-to-date tools and strategies are applied in the management of materials and corrosion on the project.
- Provide authentic and visible leadership in the areas of HSSE, diversity, interpersonal and technical skills development, and cost leadership.
- Ensure HSSEQ Compliance: Ensure all MCI activities comply with HSSEQ (Health, Safety, Security, Environment and Quality) standards and promote a safety-first culture on-site.
- Enforcing Shell and IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
- Interface Management: Manage interfaces between MCI activities and other project disciplines, including Subsea Hardware, FPSO, and Umbilical systems.
- Conduct Technical Reviews: Participate in technical reviews, including HAZIDs, HAZOPs, and constructability reviews, providing expert input on MCI-related matters.
- Maintain Industry Knowledge: Stay updated with the latest MCI technologies, industry standards, and best practices to ensure the project utilizes the most efficient and effective welding methods.
- Document Control: Ensure all MCI documentation, including reports, certificates, and records, are accurately maintained and readily available for review and audit.
Qualifications
- A minimum of a bachelor’s Degree in Engineering or equivalent (preferably Materials and Metallurgy) with at least 8 years of experience in upstream Exploration and Production (EP) projects with emphasis on Design and Execution in offshore environment.
- At least 8 years’ experience directly related to materials and corrosion.
- A COREN registered or registerable engineer.
- Technical Professional with good knowledge of Offshore facilities design, fabrication, installation, and commissioning and should have played a key role in the delivery of at least one major offshore project involving FPSO design and installation.
- Able to provide in-depth materials and corrosion expertise required for the design, fabrication, installation, pre-commissioning and commissioning of subsea and pipeline systems.
- Able to work within and interface with mixed teams of professionals located globally.
- Have excellent communication and negotiating skills.
- Previous experience in working with the Nigerian Welding Society will be an advantage.
- capability to proactively implement plans and follow through with sustained execution, meeting project milestones.
- Able to maintain composure under pressure while providing clear and decisive leadership.
- Able to deal with multiple, often conflicting, goals and priorities.
- Strong interpersonal skills – able to influence and develop relationships across disciplines and multiple cultures, be comfortable coaching and motivating others, and delivering through others.
- Able to identify opportunities for optimizing offshore systems designs, reducing operating costs (e.g. reducing chemical injection rates) and proposing technically robust solutions to deliver value.
- Familiar with project development challenges in Nigeria or in other regions with similar challenges
- Good understanding and application of Industry standards and codes for MCI (DNV, API, ASME, etc.).
- Knowledge in use of MS Office tools or similar software
- Knowledge of personal and process safety.
Application Closing Date
30th December, 2024.
How to Apply
Interested and qualified candidates should send their Applications and CV to: recruitment.ph@michaelstevens-consulting.com using the Job Title as the subject of the email.
2.) Senior Subsea Hardware Engineer Jumper Delivery
Job Title: Senior Subsea Hardware Engineer Jumper Delivery
Location: Lagos
Employment Type: Full-time
Service Description
- Promote Safety culture and drive Goal Zero compliance at the worksite.
- Enforcing Shell and IOGP HSE policies and procedures at worksites.
- Review documents issued by the contractor for the Scope of Work relevant to the Subsea manifold & Connection Systems.
- Participate in Design Reviews and Technical Workshops and any other Meetings as may be assigned in the Scope of Work.
- Review disposition Deviation/Derogation Requests, and Technical Queries that may originate from the contractor.
- Supervise manufacturing/fabrication of rigid subsea well jumpers and associated structures, ensuring compliance with procedures, design documentation, approved Inspection and test plan (ITP) and validation through testing,
- Oversee long lead items and other materials/goods receipt, inspection, and verification checks.
- Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
- Ensure Materials Record Book (including Certificated of Conformance and other technical documentation are available prior to loadout of equipment.
- Liaise with EPC-3’s logistics team at the Local Fabrication Site, to support timely transportation of equipment to the quayside and safely load out of same.
- Ensure proper storage of subsea Equipment, tools, accessories per Contractor’s storage and maintenance procedure.
- Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation and offshore Testing Procedure.
- Liaise with Company’s Lifting and Hoisting SME to review lift plan, rigging register and support safe lifting operation.
- Supervise activities at the EPC-3 Local Fabrication Site and confirm compliance with the approved procedure. Activities shall not be limited to Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, System Integration Test.
- Work with EPC-3 Contractor to ensure quality issues are properly identified, documented and timely dispositioned.
- Provide on a regular basis, a status and progress report of activities to the Lead Engineer.
- Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
- Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support team during execution of the manifold and Jumper scope, to drive compliance with project requirement and agreed schedule and key dates.
- Responsible for safe and efficient execution of work scope, and drive its timely completion, per contract and procedures.
- Liaise with internal stakeholders i.e., project, asset & operations, Wells, marine logistic, geomatic, aviation, diving, etc. team to ensure adequate support for project execution.
- Contribute to Close-out Report relevant to the Subsea manifold and Connection Systems.
- Oversee engineering analysis, creation of drawings, fabrication, and testing procedures (Welding, NDE, Coating) and other design outputs for construction.
- Participate in Design reviews HAZOPS, HAZIDS
- Review and maintain installation, operation, and maintenance manuals and guidelines.
- Review, check and approve drawings for construction at worksites.
- Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
- Lead Root-Cause-Failure Analysis (RCFA), report-out and implement preventive and proactive actions close-out.
- Share knowledge across the company. Identify and champion best practices.
- Monitor manufacturing activities at various worksites and ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
- Support the development young personnels.
- The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.
Qualifications
- Minimum of Bachelor’s Degree in Mechanical Engineering, Marine Engineering and/or Master in Subsea Engineering related discipline
- At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
- Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
- Practical experience in mechanical, electrical, or hydraulic design of subsea products
- Practical experience as Company / Operator Representation in similar type project execution.
- Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
- Practical experience in use of CAD for models, drawings, and schematics.
- Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required
- Knowledge in use of MS Office tools or similar software.
- Practical experience in working with OEM technicians and engineers to resolve technical issues.
- Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
Application Closing Date
30th December, 2024
How to Apply
Interested and qualified candidates should send their Applications and CV to: recruitment.ph@michaelstevens-consulting.com using the Job Title as the subject of the email.
3.) Senior Subsea Hardware Engineer Manifold / Suction Piles
Job Title: Senior Subsea Hardware Engineer Manifold / Suction Piles
Location: Lagos
Employment Type: Full-time
Service Description
- Promote Safety culture and drive Goal Zero compliance at the worksite.
- Enforcing Shell and IOGP HSE policies and procedures at worksites.
- Review documents issued by the contractor for the Scope of Work relevant to the Subsea manifold & Connection Systems.
- Participate in Design Reviews and Technical Workshops and any other Meetings as may be assigned in the Scope of Work.
- Review disposition Deviation/Derogation Requests, and Technical Queries that may originate from the contractor.
- Supervise manufacturing/fabrication of rigid subsea well jumpers and associated structures, ensuring compliance with procedures, design documentation, approved Inspection and test plan (ITP) and validation through testing,
- Oversee long lead items and other materials/goods receipt, inspection, and verification checks.
- Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
- Ensure Materials Record Book (including Certificated of Conformance and other technical documentation are available prior to loadout of equipment.
- Liaise with EPC-3’s logistics team at the Local Fabrication Site, to support timely transportation of equipment to the quayside and safely load out of same.
- Ensure proper storage of subsea Equipment, tools, accessories per Contractor’s storage and maintenance procedure.
- Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation and offshore Testing Procedure.
- Liaise with Company’s Lifting and Hoisting SME to review lift plan, rigging register and support safe lifting operation.
- Supervise activities at the EPC-3 Local Fabrication Site and confirm compliance with the approved procedure. Activities shall not be limited to Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, System Integration Test.
- Work with EPC-3 Contractor to ensure quality issues are properly identified, documented and timely dispositioned.
- Provide on a regular basis, a status and progress report of activities to the Lead Engineer.
- Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
- Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support team during execution of the manifold and Jumper scope, to drive compliance with project requirement and agreed schedule and key dates.
- Responsible for safe and efficient execution of work scope, and drive its timely completion, per contract and procedures.
- Liaise with internal stakeholders i.e., project, asset & operations, Wells, marine logistic, geomatic, aviation, diving, etc. team to ensure adequate support for project execution.
- Contribute to Close-out Report relevant to the Subsea manifold and Connection Systems.
- Oversee engineering analysis, creation of drawings, fabrication, and testing procedures (Welding, NDE, Coating) and other design outputs for construction.
- Participate in Design reviews HAZOPS, HAZIDS
- Review and maintain installation, operation, and maintenance manuals and guidelines.
- Review, check and approve drawings for construction at worksites.
- Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
- Lead Root-Cause-Failure Analysis (RCFA), report-out and implement preventive and proactive actions close-out.
- Share knowledge across the company. Identify and champion best practices.
- Monitor manufacturing activities at various worksites and ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
- Support the development young personnels.
- The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.
Requisite Qualifications
- Minimum of Bachelor’s Degree in Mechanical Engineering, Marine Engineering and/or Master in Subsea Engineering related discipline.
- At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
- Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
- Practical experience in mechanical, electrical, or hydraulic design of subsea products
- Practical experience as Company / Operator Representation in similar type project execution.
- Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
- Practical experience in use of CAD for models, drawings, and schematics.
- Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required
- Knowledge in use of MS Office tools or similar software.
- Practical experience in working with OEM technicians and engineers to resolve technical issues.
- Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
Application Closing Date
30th December, 2024.
How to Apply
Interested and qualified candidates should send their Applications and CV to: recruitment.ph@michaelstevens-consulting.com using the Job Title as the subject of the email.
If you have practical experience in working with OEM technicians and engineers to resolve technical issues then apply.
If you can esure the implementation of Materials, Corrosion, and Integrity (MCI) requirements in the design, fabrication, testing, installation, pre-commissioning, and commissioning of the BN project, go ahead and apply
This is great! Thanks for sharing this amazing information.